DCmark Slimflex boot push-pull duplex patch cord LC-LC OM4 LSZH Violet xx.xm

DCmark Slimflex boot push-pull duplex patch cord LC-LC OM4 LSZH Violet xx.xm

SENKO%20LC%20OM4.jpg
SENKO%20LC%20OM4.jpg

DCmark Slimflex boot push-pull duplex patch cord LC-LC OM4 LSZH Violet xx.xm

  • Optical fiber patch cords
  • Boot PushPull design
  • Polarity changeable connector
  • Round cable design
  • GIGAliteFLEX bend insensitive OM4 fibre
  • For use in cabinets and workplaces
  • Aginode ref: N128D.7LLBVxxx
お問い合わせ

説明

説明

Standards

ISO/IEC 11801

Application

DCmark Slimflex boot push-pull patch cords have a very small bend radius of 10 mm due to the use bending insensitive fiber. The small bend radius of the patch cord is beneficial in high density patching areas where a lot of bends are common. The round design of the patch cord results in a small bend radius in any direction.Traditional patch cords based on a zipcord design have a bend radius that is dependent on the orientation. With the round design and the small diameter (2mm) of the patch cable the area required for the patch cord is reduced by 40 % resulting in space savings, reduced disturbance of the airflow for cooling and easier patch cords management in high density racks. With boot push-pull design enable the connector to be disengaged easily from densely loaded panels without the need for special tools.

Characteristics

  • Patch cord cable is according to IEC 60794-2-50
  • Maximum insertion loss according to IEC 61300-3-4: 0.25 dB
  • Typical insertion loss: 0.15 dB
  • Minimum return loss according to IEC 61300-3-6: 35 dB for MM
  • Color of Jacket: OM4 is Violet
  • The diameter of the cable is 2mm
  • The fiber is bending insensitive type, has small bend radius

Design

Aginode DCmark patchcords designed according to the "Cross-Over" wiring principle to improve field installation (A1-B2, B1-A2). This conforms to the requirements of IEC 11801 and EN 50174-1:2009. The polarity of the patch cord can be changed by opening the uniboot connector on one side and change the position of the 2 LC connectors.

Characteristics

Characteristics

Construction characteristics
Fiber optic type
OM4 50/125
Outer sheath
LSZH
Mechanical characteristics
Crush resistance (IEC 60794-1-E3)
50 N/cm
Maximum pushing force
150 N
Transmission characteristics
Insertion Loss, maximum, dB
0.25 dB
Return Loss, Minimum, dB
35 dB
Usage characteristics
Operating temperature, range
-10...60 °C

商品

アクション
フィルター

  • 7 商品
N122_2.aLCWYxxx

DCmark SlimFlex PushPull DLC Patch Cord polarity changeable OS2 LSZH xm Yellow

Aginode ref. N122.4LCWYx

 

Slimflex_OM4_VIOLET_0

DCmark SlimFlex PushPull DLC Patch Cord polarity changeable OM4 LSZH xm Violet

Aginode ref. N122.7LCWVx

 

N122_2.aLCWAxxx

DCmark SlimFlex PushPull DLC Patch Cord polarity changeable OM3 LSZH xm Aqua

Aginode ref. N122.5LCWAx

 

SENKO LC

DCmark Slimflex boot push-pull duplex patch cord LC-LC OS2 LSZH Yellow xx.xm

Aginode ref. N128D.4LLBYxxx

 

SENKO LC OM3.jpg

DCmark Slimflex boot push-pull duplex patch cord LC-LC OM3 LSZH Aqua xx.xm

Aginode ref. N128D.5LLBAxxx

 

N122_2.aLCWAxxx

DCmark SlimFlex 带拉手双工LC光纤跳线 可换极性 OM4 LSZH xm 水绿色

Aginode ref. N122.7LCWAx

 

N122_2.aLCWAxxx

DCmark SlimFlex PushPull DLC Patch Cord polarity changeable OM4 LSZH xm Aqua

Aginode ref. N122.7LCWAx