メインコンテンツに移動

LANmark-7A 1250 S/FTP AWG23 Cat 7A 1250MHz LSZH B2ca s1a d1 a1 Orange 1000m reel

説明

説明

Standards

EN 50173-1; EN 50288-4-1; IEC 60332-3-24; IEC 61156-5; IEEE 802.3bt (PoE++); ISO/IEC 11801

Description

LANmark-7A are 4 pair S/FTP cables with individual pair foils and an overall braid offering upper frequencies of at least 1250MHz but up to 1600MHz. All cables are fully compliant with Category 7A standard and offer even large headroom above the Cat 7A requirement. Due to this excellent electrical performance and positive ACR all cables supports applications beyond 10GBASE-T, including 25GBASE-T.  

 

Application

LANmark-7A is the highest performing standardised cabling solution in the enterprise market and will support all current data applications and all planned applications using cabling up to Class FA. 

  • All Ethernet applications including
  • 10/100/1000Base-T
  • 1000Base-TX
  • 10GBase-T
  • 25GBase-T up to 30m
  • POE, POE+, POE++ (Draft)
  • Cable sharing applications including CATV up to 862MHz
  • Any future Class FA application

 

Installation

Ease of Installation is one of the main features of the LANmark-7A cable. Extra attention has been paid to ensure that the screen coverage is maintained and foils do not open during installation. The cable has been specially designed to be used in conjunction with the LANmark-7A GG45 12C connector.

To support the correct set-up of hand held analysers for installation testing, the actual cable NVP value is given in the cable’s print legend.

Electrical Performance LANmark-7A 1250 Cable

Characteristics

Characteristics

Construction characteristics
Sheath colour
Orange
Screen
Aluminium foil + tinned copper braiding
Drain wire
No
Outer sheath
LSZH
Type of cable
S/FTP
Dimensional characteristics
Nominal outer diameter (mm)
7.9 mm
Diameter over insulation
1.45 mm
Approximate weight
68 kg/km
Number of pairs
4
Conductor cross-section (AWG/KCMIL)
23
Electrical characteristics
Mutual capacitance
45 nF/km
Characteristic impedance
100 Ohm
Max. transfer impedance at 30 MHz (Ohm/km)
50 Ohm/km
Max. DC resistance of the conductor at 20°C
80 Ohm/km
Mechanical characteristics
Maximum operating pulling force
100 N
Transmission characteristics
Coupling attenuation at 30 MHz
>85 dB
Skew
25 ns/100m
Propagation delay, max. 100 MHz
536 ns/100m
Nominal Velocity of Propagation (NVP)
82 %
Usage characteristics
Category
Cat. 7A
Packaging
Reel
Gases corrosivity
IEC 60754-1; IEC 60754-2
Smoke density
IEC 61034-2
Range
LANmark-7A
Length
1000 m
Minimum Bend Radius - During Installation (under Tension)
63 mm
Fire retardant
IEC 60332-3-24 (cat C)
Flame retardant
IEC 60332-1
Minimum Bend Radius - Installed
32 mm
Operating temperature, range
-20...60 °C
Ambient installation temperature, range
0...50 °C

リソース

リソース

商品

7ASFTP

LANmark-7A 1250 S/FTP AWG23 Cat 7A 1250MHz LSZH Dca s2 d1 a1 Orange 1000m reel

Aginode ref. N100.371-OD

  • Type of cable: S/FTP
  • Conductor cross-section (AWG/KCMIL): 23

 

7ASFTP

LANmark-7A 1250 S/FTP AWG23 Cat 7A 1250MHz LSZH Dca s2 d1 a1 Orange 500m reel

Aginode ref. N100.372-OD

  • Type of cable: S/FTP
  • Conductor cross-section (AWG/KCMIL): 23

 

7ASFTP

LANmark-7A 1600 S/FTP AWG22 Cat 7A 1600MHz LSZH Dca s2 d1 a1 Orange 1000m reel

Aginode ref. N100.381-OD

  • Type of cable: S/FTP
  • Conductor cross-section (AWG/KCMIL): 22

 

7ASFTP

LANmark-7A 1250 S/FTP Dual AWG23 Cat 7A 1250MHz LSZH Dca s2 d1 a1 Orange 500m reel

Aginode ref. N100.373-OD

  • Type of cable: S/FTP Shotgun
  • Conductor cross-section (AWG/KCMIL): 23

 

7ASFTP

LANmark-7A 1600 S/FTP Dual AWG22 Cat 7A 1600MHz LSZH Dca s2 d1 a1 Orange 500m reel

Aginode ref. N100.383-OD

  • Type of cable: S/FTP Shotgun
  • Conductor cross-section (AWG/KCMIL): 22

 

7ASFTP

LANmark-7A 1250 S/FTP AWG23 Cat 7A 1250MHz LSZH Cca s1a d1 a1 Orange 1000m reel

Aginode ref. N100.371-OC

  • Type of cable: S/FTP
  • Conductor cross-section (AWG/KCMIL): 23

 

7ASFTP

LANmark-7A 1600 S/FTP AWG22 Cat 7A 1600MHz LSZH B2ca s1a d1 a1 Orange 1000m reel

Aginode ref. N100.381-OB

  • Type of cable: S/FTP
  • Conductor cross-section (AWG/KCMIL): 22