Aller au contenu principal

LANmark-6A UniBoot UTP Patch Cords Cat 6A LSZH 3m Orange

LANmark-6A UniBoot UTP Patch Cords Cat 6A LSZH 3m Orange

Description

Description

Normes

EN 50173-1; IEEE 802.3an; ISO/IEC 11801; TIA/EIA TSB-155; ANSI/TIA-568.2-D

Application

LANmark-6A Uniboot cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other Cat.6A application.

LANmark-6A Uniboot UTP Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel configurations. These cords use stranded cable and as such provide maximum system flexibility for the use at Cross Connects and Consolidation points.

They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Uniboot cords can be used for accurate field testing of Cat 6A cabling channels.

Uniboot Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.

They also come with a ‘Replaceable’ Latch Protector, which can be used for colour coding of different services.

Performance

The LANmark-6A Uniboot cords fully comply and exceed the requirements of ANSI/TIA-568.2-D and ISO11801 and enable to achieve high performing Cat 6A channels. Used with other LANmark-6A components, very short Cat 6A link and channel configurations with up to 3 connection points within 10 meters can be supported.

Guarantees

When installed in combination with other LANmark-6A components, a 25 years channel warranty can be obtained, covering full 10GBase-T support and full Cat 6A/Class EA compliance.

Usage

  • The cords together with LANmark-6A UTP compoments can build up 6A UTP channels with fully Alien Crosstalk compliant, so no special installation rules need to be taken into account for ANEXT and AFEXT compliance.
  • 1, 2, 3, 5, 10m are standard lengths available from stock; other lengths are available on demand.
  • Orange (N11A.P1UxxxOK) and Dark Grey (N11A.P1UxxxDK) are standard colours available from stock. Other colours available as make-to-order
  • Default Plug Configuration is a black boot with a preinstalled black latch protector.

Caractéristiques

Caractéristiques

Caractéristiques de construction
Couleur
Orange
Gaine extérieure
Faible dégagement de fumée et sans halogène
Caractéristiques dimensionnelles
Section AWG du conducteur
AWG 26
Diamètre externe nominal (mm)
6.0 mm
Caractéristiques électriques
Impédance caractéristique
100 Ohm
Caractéristiques d'utilisation
Gamme
LANmark-6A
Application
Intérieur
Longueur
3 m
Catégorie
Cat. 6A
Non propagateur de la flamme
IEC 60332-1
Fonction du composant
Cordon
Conditionnement
Sachet en plastique
Durée de vie mécanique à l'insertion
750

Produits

6A UTP

LANmark-6A UniBoot UTP Patch Cords Cat 6A LSZH 1m Orange

Aginode ref. N11A.P1U010OK

  • Couleur: Orange
  • Longueur: 1 (m)

 

6A UTP

LANmark-6A UniBoot UTP Patch Cords Cat 6A LSZH 2m Orange

Aginode ref. N11A.P1U020OK

  • Couleur: Orange
  • Longueur: 2 (m)

 

6A UTP

LANmark-6A UniBoot UTP Patch Cords Cat 6A LSZH 5m Orange

Aginode ref. N11A.P1U050OK

  • Couleur: Orange
  • Longueur: 5 (m)

 

6A UTP

LANmark-6A UniBoot UTP Patch Cords Cat 6A LSZH 10m Orange

Aginode ref. N11A.P1U100OK

  • Couleur: Orange
  • Longueur: 10 (m)